1. Move the mouse pointer to a blank area of the screen (ie., no windows or screens open under pointer).
2. Press & Hold the Right mouse button down and select 'Exit Fvwm'.
3. Left click on 'Yes, Really Quit'.
4. At the Linux prompt type: exit.
5. At the login prompt, simultaneously press the CTRL-ALT-DEL keys to reboot the computer.

Re-booting from a LINUX prompt

1. At the Linux prompt type: exit.
2. At the login prompt, simultaneously press the CTRL-ALT-DEL keys to reboot the computer.

Re-booting from X-Windows

1. At the login prompt, simultaneously press the CTRL-ALT-DEL keys to reboot the computer.

The NI2MASS / SI2MASS computer can be in one of two states, DOS or LINUX.

Rebooting from DOS or LINUX

1. To Reboot the NI2MASS / SI2MASS, simultaneously press the CTRL-ALT-DEL keys to reboot the computer.
2. At the LILO prompt type: dos to boot into DOS or linux to boot into LINUX.

To Reboot the TCS computer.

If the TCS program is running:

1. Move to the shutDown menu and press the ENTER key.
2. Press the ENTER key again for Auto shutdown.
3. Press the ESC key and then the ENTER key a third time to exit to a DOS prompt.
4. At the DOS prompt, simultaneously press and release the CTRL-ALT-DEL keys to reboot.
5. After the TCS computer reboots and is at a C:\TCS> prompt, type tcs
6. Press the ENTER key to start the TCS system checkout and initialization.

If the TCS Program is not running:

1. At the DOS prompt, simultaneously press and release the CTRL-ALT-DEL keys to reboot.
2. After the TCS computer reboots and is at a C:\TCS> prompt, type tcs
3. Press the ENTER key to start the TCS system checkout and initialization.

Version 2.3 - October 4, 1998